This post may contain affiliate links so we may receive compensation if you sign up for or purchase products linked to below. As an Amazon Associate, I can earn from qualifying purchases. Read our disclosure for more information.
If your profession requires a tool belt and you need to have one while working that can hold all the tools that are required you need to buy a belt that fulfills your requirements. You just don’t have to look only the belt with enough bags on it but also the material of the product and how much comfortable the belt will be while you are at work.
This belt will give you perfect look. The comfort level is very high. You can find these belts in different sizes. These are also available in different colors as well. Go and grab the tool belt.
Best Tool Belts Reviewed
Our team compiled a list of the best tool belts reviewed to pick a comfortable bag to carry your tools easily and boost your performance & productivity:
1.Occidental Leather 9855
This is a remarkable tool belt for professional carpenters which provide great comfort. It is designed with high-end leather quality material. The nylon bags on this belt are 10 Inch Deeper with leather support on its bottom and corner areas. The Occidental Leather 9855 belt has 24 pockets that can hold multiple tools and the length of the belt is easy to adjust on pants of different sizes from 32” to 41”. It consists of high intensity of neoprene, strong nylon and leather elements to make this belt comfortable and more durable.
This belt is not comfortable due to the big size of bags. It is too heavy in weight. The bags are fixed and sewn to the belt which makes the belt useless if any one part is torn. Pockets for tools are not adequate while some pockets are not even in the right place especially for the hammer tools. Also, for those who are used to occidental belts, the bag is on the right side for measuring tap while this belt has on the left-hand side and you can’t move the bags on this belt.
The belt can be adjusted easily according to different waists. Its size varies according to waists from 32” to 41”. Every adult of a family can use this belt without any issue. One can be used by everyone. D-rings are Pre-fitted in bags to store hand-specific tools.
It will help to assist in workflow and maintain your momentum while working. The belt has 24 pockets that can carry multiple tools of different shapes and sizes. For carrying tools of large size it has 10” deep main bags and 2-in-1 tool and hammer holder on the. Occidental Leather 9855 is a Leather Buscadero Design. Leather material is used in the belt to increase its durability. If you are looking for more support we suggest to invest in high quality tool vests and Occidental Leather offer a large options.
In conclusion, Occidental Leather 9855 is a great quality belt despite it has an issue in its big bag sizes and heavy in weight. The build quality of this product is durable. This belt is really very comfortable. The best thing is that you can adjust the waist belt easily and you don’t need to buy more than one belt.
By understanding the importance of comfort back and ease, we offer you the most incredible tool belt which provides support and ventilation to help you sweat less. For ease in transportation, this leather tipped belt has carry handles which help you to put it on and off easily. For its guaranteed toughness and its different sized pouches Gatorback B145 is built for professionals that help in carrying tools of various sizes.
The stiff material of the belt is uncomfortable which causes uneasiness in walking. The different sized pouches are either too big or too small. Big pockets are too deep while small pockets are too tight, things like screws/fasteners start falling out. The built quality of this product is not up to the mark. The bag starts to rip after few months of use. The hammer hanger is in the wrong place and the clips for drill/impact driver are missing.
This belt comes in average fit size which is comfortable to most of the users and it is also available in different sizes according to the requirement. The flexible material of Gatorback B145 keeps the belt in place which provides the user comfort. It will give you sweat free experience. You can find them in different number of sizes. The available color is only black.
The material used in pouches is for heavy duty and the special Dura Tek nylon ensures its durability which holds up pouches for a long time. All pockets are easy to access which includes an 8’’ deep center pouch and 7 pocket tool pouches for fasteners. The box shaped pouches are designed with interior plastic lining which doesn’t sag or rip off and keeps them in shape.
To conclude, Gatorback B145 is a great product despite its various comfort issues. It has some great qualities like easily accessible pockets, carry handles. Its ventilation mechanism which provides the user relieves as well as sweats free experience.
We offer you the most comfortable CLC Custom tool belt with dual layers which is designed with top-grain leather. It also provides support and ventilation. For ease in transportation, the carry handles provide adjustments for carrying contents without spilling. The multiple sized pockets hold a variety of objects and the interior lining doesn’t let them drop or rip off.
The stiff material of the belt is uncomfortable which causes uneasiness to the users who put it daily. The bags begin to sag because of not having a proper plastic lining. The pockets are on the wrong sides and the user feels it difficult to keep the focus on work. The built quality is not up to the mark and the sizes of the bags are either too big or too small. One of the major issue is that of you order this you will not get the same product as shown in the picture.
This belt is padded with double tongue steel buckle which comes in average fit size. The ballistic nylon and leather ensure its durability. It will holds up pouches for a long time. This belt is designed with 27 pockets in total, 17 pockets are for smaller items and 8 main tool pockets.
For ease in transportation, CLC Custom belt has carry handles which offer simple adjustments. The user carries content without dropping it. It is crafted from super tough nylon plus leather. It is designed especially for professionals that help in carrying tools of different sizes.
In a nutshell, CLC Custom belt is a great product for the users who do the heavy-duty. Though it is made with fantastic tough material. It also provides a comfortable experience due to its ventilation mechanism. The leather keeps the pouches in place and because of its guaranteed toughness; they help in carrying tools of different sizes.
The Klein Tools 55427 belt is very comfortable and simple to wear. It has removable pockets so you don’t need to stress over stacking and emptying superfluous instruments. All the way open pockets are extraordinary for apparatuses, bores, and extra parts. A bore pocket, hammer holder, and circle measuring tape holder are additionally included. This belt accompanies fully open pockets, a cushioned belt, handles, and the sky is the limit from there! Set aside time and cash with the correct Tool Belt.
There aren’t sufficient screwdriver holders and the Velcro bit holder pocket on the left bag is superfluous. The quality of this belt is just awful. The nature of the leather is undermined. You can see tears on the belt after few uses. Following a month’s utilization sewing within the pockets is ripped off. The pockets where you are going to put substantial instruments are appended by around 3/4 inch of modest snare and circle. The quality of the belt is very cheap. You cannot find this long lasting.
Klein Tools 55427 belt is intended to be sturdy and simple to wear. This belt is a great choice for anyone. Detachable pouches enable you to convey just the instruments you need. Its wide-open pockets are for accessories; tools are quite useful.
The Belt is very comfortable, especially with suspenders. The pouches are strong and can handle the weight of hand tools without the sides collapsing. You can find them in three different sizes. The available sizes are medium, large and extra large. The color of this belt is black.
In conclusion, Klein Tools 55427 has the perfect leather tool pouch. Made from quality leather – it’s functional, comfortable, and durable. The pockets are wide and have a great deal of space for device stockpiling and additional parts and fittings. Go and get your belt for professional use.
To provide comfort to the professionals DEWALT DG5617 framer’s Combo apron is being introduced which allows better adjustments with its easy one handle carrying style. The belt is designed with padded yoke-style suspenders with Dri-Lex5” which added its comfort and are fully adjustable. The pockets are designed in a gusset style which includes 9 main pockets and 11 smaller pockets. The double-tongued roller buckle is made on this apron to keep the belt stable and provides extra comfort to the user.
The plastic lining in the suspenders begin to break after using for a certain use and the pockets begin to tear apart. The size of the belt doesn’t fit everyone and because of the waist size, it becomes difficult for the users to adjust it properly. The clips that support the weight is designed with cheap plastic which breaks after a few uses. The belt is not properly padded as it is uncomfortable and the buckle begins to tear apart.
This belt is designed with suspenders that are fully adjustable. They are properly padded to give comfort to the users. The style of these suspenders is in yoke-style which permits distributing weight equally. The pockets of different sizes help the user to work comfortably. It has 20 pockets in total, 9 main pockets and 11 smaller pockets and sleeves for nails, pencils etc.
The pockets on the DEWALT DG5617 framer’s Combo apron suspenders are easy to access. The large style pockets provide extra capacity and the zipper pouches are designed to secure valuables such as keys etc. The size of this belt is designed which suits to the average users. It fits waist size is 29”-46” and it is fully adjustable and comfortable in use.
In a nutshell, this DEWALT DG5617 framer’s apron is just a great choice for you. It allows the users to work for longer hours comfortably. You can find them in 2 types, one is no pocket on suspenders and the second one is pocket on suspenders. You can easily adjust this work apron. It also has cell phone holder as well. This will give you perfect comfort.
Ergodyne Arsenal tool belt is very comfortable and light in weight. Ballistic Nylon material is used in to avoid punchers and enhanced PVC is used on the base of pouches to make this product more durable. The drains in main pockets keep the tools and fasteners ventilated. It comes with 28 pockets which are perfect for hold a wide variety of tools, 16 pockets are for tools and 11 pockets are for the fastener. This belt is best for waist sizes 32”-46” and is easily adjustable.
The tool belt is too big. It’s very bulky and it becomes uncomfortable to wear. It has no handles to carry the belt. The placement of pockets is different than normal belts. Also the speed square pocket is missing. Even one or more than one drains in the main pocket is damaged; nails and other small tools start dropping. They don’t have chest strap.
Ergodyne Arsenal tool belt is very light weight as well as comfortable. Its soft material makes it easy for you do your job. It’s a Perfect belt for holding plenty of tools. Small pockets for smaller tools like nails, pencils, end nips, diagonal cutters etc and 11 pockets to place fasteners.
The drains in pockets are designed to avoid store water or moist in it and keep the tools and fastener ventilated and dry. This belt comes in a various range of waist sizes from 32” – 46”. It fits perfectly on any of these waists. It’s really worth the money.
In conclusion, Ergodyne Arsenal is perfect belt despite it has an issue in its too big sizes. You can have 5 inches wide padded work tool belt. This will give you perfect comfort to hold your tools. This belt comes with 28 pockets which are enough to place a lot of tools and fasteners. The ballistic nylon and enhanced PVC material used in punches makes this belt more durable.
Pros
28 pockets
Ballistic Nylon material to avoid punchers
10” Inch Deeper nylon main bags
Drains in Pockets for ventilation
32”-46” wait sizes
Cons
Big sized bags
No handles to carry
Speed square pocket is missing
Damaged Drains in pocket start dropping small tools
Bucket Boss is very comfortable and is made up of heavyweight poly fabric to enhance its durability. It has pouches plus suspenders which can be detached or adjusted for personalized tool organization. Barrel-bottom, reinforced pouches permit additional carrying capability. This belt comes with one steel hammer holder and for other long-handled tools. Its size of this belt is very flexible and can be adjusted up to the waist of 52”. Special technology is used in this belt which bears the load and stretch according to the weight to move and work comfortably.
The negative points of this pocket are it has an excessive number of pockets that stretch out a long way past. It’s getting snared on everything from stepping stools to wiring. The tape measure clip broke off the rivet. The suspenders are pointless. The Velcro circles come directly off. The change on the belt slips as terrible as the suspenders except if you are conveying plastic apparatuses.
Burden bear stretch suspension bears all the load of the tool on the belt and helps to move and work comfortably. You can customize this belt as well by readjust the pouches as well as suspenders. You can remove them if you are not feeling comfortable. you can gift this to anyone who need this for their profession.
Bucket Boss tool belt has a strap which you can adjust on the chest that can hold your cell phone. Barrel-bottom is pouches that can carry any extra tools you need. Steel clasp belt with beast grommets fits abdomen size up to 52 inches, suspenders included (zip-attached to work belt).
In conclusion, Bucket Boss is very durable and comfortable belt despite it has too many pockets that extend too far beyond getting hooked on everything from ladders to wiring. The suspension technology used that can bear the burden help while working. Holding the phone while working also is a great plus point to two tasks at the same time.
By fully understanding the comfort of the users we offer the Carhartt Legacy Tool Belt which is lightweight. It keeps the items organized with its several sized pockets. When doing a heavy-duty it is not possible to run for your tools, so this belt does the job when you want to do the job efficiently. With its durable and water repellent material it offers the precise item you are looking for. The pockets are properly organized which are easily accessible and the built quality is great for those who do the heavy-duty.
The pockets are not properly organized and not easily accessible. The pouches are either too big or too small and they sack right on top of another which make them all twisted. The content either slides down from your fingertips or just stuck in there. The material is not up to the mark. The inner part is not properly padded which causes uneasiness due to walking. The smell of the material is terrible. The slot of hammer is not convenient.
The material used in the Carhartt Legacy Tool Belt is 100% polyester which is lightweight. The users find it easy to use it for longer hours especially when they are doing heavy-duty. It is unique in its way as the corners are designed with Duravax abrasion-resistant which added its durability. Its water repellent system gives the user a sweat-free experience.
The pockets are properly organized as well as they are easily reachable. There are 9 pockets with six loops in it and two removable pockets make it easy to remove them when not needed. The inner part of the belt is fully padded to provide comfort to the user and the adjustable size of the belt fits up to 42 inches waist. The varieties of pockets are made for the tools of different sizes. These pouches are stitched with several counts to ensure its durability.
In a nutshell, Carhartt Legacy is the best choice for the heavy-duty. The properly organized pockets offer easy access for the users. You can easily hold your tools. It’s well constructed and fantastic. The quality of this belt is perfect. You can find this as a decent tool belt.
Task Tools T77265 belt is very tough and durable. It comes with 12 easily accessible rounded corner pockets of different sizes and 2 rust preventive holders for the hammer. There is a roller buckle on the belt for your safety. For heavy-duty, this 2 Inch wide belt is made up of saddle leather and oil-tanned split leather is used to enhance durability.
The belt is heavy and bulky. The material of leather not good, the pockets start tearing off within 2-3 weeks of use. The front pocket size is little smaller in size while pencil holders, pry holder and knife holders are a bit bigger. The waist sizes of the belts are not correct, for example, the waist size 32” belt is very lose and doesn’t fit properly. The design of this belt is very poor.
The 12 rounded cornered easily accessible pockets of different sizes and keeps your work inflow. The material used in Task Tools T77265 belt is saddle Leather and size of the belt is 2 inches wide, which makes this belt to do heavy-duty works. The leather of the belt has great quality.
The belt is tough and not too bulky. It has a great capacity to hold most of the tools even sharp objects easily. The roller buckle helps to keep you safe and comfortable while working. 2 holders for hammers are nickel-plated which prevents them to catch rust and enhances its sustainability.
In conclusion, Task Tools T77265 belt is a heavy-duty belt despite it has an issue in its heavyweight and wrong pocket sizes. The build quality of this belt is just amazing. There are lots of pockets you can use while working. The price of this product is very reasonable. This is the best choice for you.
Lautus tool belt is flexible and made up of 100% genuine leather which makes this belt more durable and long-lasting. For the tools space, this belt comes with many pockets so that you can keep all the tools you need. The build quality of this belt is very solid and due to which this belt is best for heavy-duty works and durability all the tool bags are double stitched.
The belt is not comfortable; the size of the pouches is too big and unable to adjust them. The belt waist sizes mentioned in the description don’t match. They say Lautus tool belt will fit up to 52” of the waist but in actual the belt is smaller waist size. The leather material used is so stiff and it breaks after a few weeks.
Lautus belt is made of genuine leather which is 100% real. A lot of variety of pockets on this belt helps you to keep all the tools you need. It’s best of any kind of work you are doing. Fits perfectly on any waist size range from 30” to 46”.You can adjust it according to your waist. It makes you feel comfortable while working.
Build quality of this belt is superb and long-lasting. It’s best to use while doing heavy-duty jobs. Lifetime warranty for this belt is provided. The price of this belt is very reasonable. Anyone can get this in small budget. It’s very flexible.
In conclusion, Lautus tools belt is a genuine leather belt despite it has an issue in the size of bags and becomes uncomfortable due to its hard material. You will not find this bulky like other different pouches. It’s very comfortable and durable construction. It’s very handy and you can use this for various tools. So what are you waiting for? Go and get your belt!
Buyer’s Guide & Tips To Choose The Best Tool Belts
The tool belts are designed for the professionals who work for longer hours and with the easily accessible pockets and carry handles you will find it easy to do the heavy-duty. With a unique and advanced style, these tool belts are becoming the favorite for many people who incline to work efficiently. Whenever you want to work tool belts will not only save your time and energy finding the contents but also improve your performance as they are light weighted and with the adjustable sizes they are comfortable in use.
When it comes to buying a suitable belt, you may find it difficult but if you consider the following instructions you will get exactly what you are looking for. Instead of just grabbing in a great hurry and making the wrong decision you must follow certain things. The flexible material, steel buckle, durable fabric and yoke-style improve the ease to the users.
Always see important Features:
The first rule must be that you must be sure about what exactly you are looking for and that what you need instead of saying that you only want to experience. If you buy any belt brand that doesn’t suit you then you may regret in future so go for the tool belts that can meet your supposed needs, so your decision must be the wise one. For instance, the waist size which fits you well and the material you are looking for, you need to go for that item which is designed with full protection.
If you had any bad experience of purchasing belt in the past than this time go for the essentials you might have missed previously. You must focus on the features of the belts and your choice will be depending on it so that you may not miss any aspect. Tool belts can help you work comfortable and ensure your safety.
You must consider those designs in the tool belts which are easy to carry and comfy at the same time so that you may enjoy using it.
The belts are made in various designs but it is not guaranteed that any belt will suit you. So you need to consider which is perfect for you, the one with fewer pockets or the one which is less sweaty.
See the different colors that are available and choose which appeals to you and efficiently do your work.
Buy according to the size
To work comfortably it’s very important to check what waist size you need. Every belt seller mentions the waist sizes they are offering so you can look at it before buying. You must double-check your waist and then see which will be perfect for you; if you order the wrong belt size you will not be comfortable while working.
Keep an eye on the budget
Before ordering the tool belt you should check which belt will suit in your budget limit. It doesn’t mean you should order a cheap belt but also keep in mind that buying an expensive belt will be the best choice. If you are not feeling comfortable and the belt is not fulfilling your requirements, it means you don’t have to spend money on such belts.
The seller profile is important
Make sure that you will get the same product what you are seeing in the pictures. Must check seller profile before placing an order, sometimes they show some else products in pictures and what you receive is totally different and also not the same quality. The rating of the seller should be good to avoid such bad incidents.
Clientele Testimonials
The best way to check either you should order the product or not, check the reviews section where customers who already have bought that product share their experience. It will help you that either that product is good for you or not.
Frequently Asked Questions (FAQs)
What tools should be in a tool belt?
Tool belts save people both effort and time. A proper tool belt comes with two side pockets, each of which has smaller pockets. It can hold devices in different sorts of shapes and sizes.
The common hand main tools include the following list:
Claw hammer
Line chalk
Pencil
Sharpie
Knife to putty
The pliers of Lineman
Measuring tape
Scissors
Tape
Knife
What are the best fabrics for tool belts?
While choosing the best tool belt to buy, material or fabric used in the construction of the belt is one of the most crucial points to consider. If you do not want the bulky feeling of low durability, the best fabrics for tool belts include heavy-duty canvas and nylon or polyester with multiple layers. These contents provide high strength and make the product quality-oriented.
Why are tool belts expensive?
Many different companies are in manufacturing tool belts. The price of these products also varies with the brand. There are many options available out there in the market. Some of the options are low in price, while the other costs much. Many high-quality tool belts cost much due to the use of high-quality leather or any other material. Moreover, the number of pockets and many additional features also increase the price of the product.
Are Occidental Leather the best tool belts?
Tool belts by Occidental are a popular choice. They are considered one of the best available utility belts. The belt consists of pure and high-quality leather that has the potential to last longer. In these belts, pockets also include leather as the primary construction material. These belts offer several holders and pockets for your convenience.
Conclusion
In conclusion, if you will keep all the above-mentioned information in your mind before ordering the tool belts, it’s sure you will certainly get the correct product. Research is very important to get exactly the right product that you need.
I bought Task Tools to go around the stump under my anvil. Went on a MAD comparison search, about 20 hours, decided on these. I could NOT be happier! They are SUPER rugged, heavy leather and shockingly well made! I can’t see these ever tearing or wearing out, even if I wore it in construction all day, every day, for years.
I bought Task Tools to go around the stump under my anvil. Went on a MAD comparison search, about 20 hours, decided on these. I could NOT be happier! They are SUPER rugged, heavy leather and shockingly well made! I can’t see these ever tearing or wearing out, even if I wore it in construction all day, every day, for years.
I was impressed by Occidental Leather 9855. But I don’t know if it fits my roofing job? Can you give me advice? thank you!
Hey Everett, What is your job?